Panasonic HC-W585 Page 37 Operating Instructions Manual Download

Page: 37 / 247

- 37 -

This makes it easier to view the LCD monitor in bright places including outdoors.

≥

These settings will not affect the images actually recorded.

≥

When the AC adaptor is in use, the LCD monitor is set to

automatically.

≥

Recordable time with the battery is shortened when the LCD is made brighter.

It adjusts brightness and colour density on the LCD monitor.

≥

These settings will not affect the images actually recorded.

Select the menu.

Touch

to adjust settings.

Touch [ENTER].

≥

Touch [EXIT] to exit the menu screen.

Please refer to page

118

Please refer to page

119

[POWER LCD]

: [SETUP]

[POWER LCD]

desired setting

(Makes brighter)/

(Normal)/

(Makes less bright)

[LCD SET]

: [SETUP]

[LCD SET]

desired setting

[BRIGHTNESS]:

Brightness of the LCD monitor

[COLOUR]:

Colour level of the LCD monitor

[HDMI RESOLUTION]

[VIERA Link]

MENU

-1

MENU

Summary of Contents for HC-W585
























































































































































































































































Search results

Summary of Contents for HC-W585

Reviews:

Related manuals for HC-W585

Brands by name

Popular brands

Panasonic HC-W585, Operating Instructions Manual

Search results

Summary of Contents for HC-W585

Reviews:

Related manuals for HC-W585

Brands by name

Popular brands