Panasonic HC-W570, Owner'S Manual

Page: 134 / 221

- 134 -
You can confirm the recording screen of this unit from outside using a smartphone.
Preparations before using [Home Cam]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Install the smartphone application “Image App” on your smartphone. (
l
152 )
3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.
4 Set up a Wi-Fi connection between this unit and the wireless access point.
≥
[WPS Connection] ( l 156 )
≥ Searching for wireless access points to set up a connection ( l 157 )
≥
Setting up a connection manually ( l 158 )
When the Wi-Fi connection is complete, proceed to “Using [Home Cam]”.
≥
Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (
l 154 )
Wi-Fi
[Home Cam]
≥
Switch the Wi-Fi setting to off on your smartphone and use with mobile network such
as 3G.
≥
If [CLOCK SET] (
l
20 ) is not set correctly, [Home Cam] cannot be used.
≥ Check your contract details carefully, as smartphone and internet contract details may
result in high communication charges being incurred, or a limit placed on
communication traffic.
Caution:
This function is not designed for anti-theft or disaster use.
XXXXXXXXX XXXXXXXXX