- 83 -
∫
To set the White Balance manually
1
Select
, fill the screen with a white subject.
2
Touch and set the blinking
.
≥
When the screen turns black instantly and the
display stops
flashing and then lights constantly, the setting is complete.
≥
If the
display continues flashing, the White Balance cannot be
set. In this case, use other White Balance Modes.
≥
When the
display flashes, the Manual White Balance previously adjusted is stored.
Whenever recording conditions change, re-set the White Balance.
≥
is not displayed on the screen when
is being set.
FOCUS
SHTR
IRIS
WB
MNL
AWB
AWB
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 83 ページ 2018年2月22日 木曜日 午後12時30分