- 151 -
Deleting part of a scene
(AVCHD/Backup for Twin Camera)
Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be
deleted.
The deleted scenes cannot be restored.
≥
Touch [AVCHD] in the motion picture/still picture tab (
1
Select the menu.
2
Touch the scene with a part to delete.
3
Set the section to delete by touching and sliding
the top and bottom section selection buttons
.
≥
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (
4
Touch [ENTER].
5
Confirm (play back) the scene after editing by touching [YES].
≥
A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥
A confirmation message appears.
7
Touch [ENTER].
≥
Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
≥
Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥
It may not be possible to delete part of a scene with a short recording time.
≥
The scene will be divided into two scenes when the middle part of a scene is deleted.
≥
(For the
)
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining. (
: [EDIT SCENE]
#
[SECTION DELETE]
MENU
0h00m15s
0h00m15s
0h00m15s
WXF1M
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 151 ページ 2018年2月22日 木曜日 午後12時30分