- 67 -
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Ø
10 (Records after 10 seconds)
#
Ø
2 (Records after 2 seconds)
#
setting cancelled
≥
When you press the
button,
Ø
10 or
Ø
2 flashes for the set period before a still picture is
recorded. After recording, the Self-timer is cancelled.
≥
In Auto Focus Mode, if the
button is pressed halfway once and then fully, the lens focuses
on the subject when the button is pressed halfway. If the
button is pressed fully all at once,
the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
≥
Setting the Self-timer to
Ø
2 is a good way to prevent image shake when the
button is
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
≥
If there are extremely dark parts or the brightness is insufficient, the effect may not be clear.
This makes the image brighter to prevent darkening of a backlit subject.
You can check if the image is level while recording motion pictures and still pictures. The
function can also be used to estimate the balance of the composition.
It will switch every time the icon is touched.
#
#
#
Setting cancelled
≥
The guidelines do not appear on the images actually recorded.
Self-timer
Intelligent Exposure
Backlight Compensation
Guidelines
