Panasonic HC-V785 Page 93 Operating Instructions Manual Download

Page: 93 / 222

- 93 -

The scenes put together as a Highlight Playback can be saved as a single scene.
The recorded scenes can be saved in the SD card.

Stop the playback of the Highlight Playback or wait until the Highlight
Playback is finished.

Touch [SAVE].

Select the format to save.

*1 This format is displayed only when an AVCHD scene is selected.
*2 This format is not displayed when an AVCHD scene is selected.
*3 [MP4 1920

1080/25p] cannot be selected when an MP4 [720/25p] scene is selected.

(When [AVCHD 1920

1080/50i] is selected)

≥

Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE])
and saved.

≥

Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.

Touch [YES].

Touch [EXIT].

≥

is displayed on the thumbnail of the scenes saved by the Highlight Playback.

Saving the Highlight Playback

[AVCHD 1920

1080/50i]

It will be saved in high-definition image quality.

[MP4 1920

1080/25p]

*2, 3

It will be saved in high-definition image quality. The format
supports playback on a PC.

[MP4 1280

720/25p]:

It will be saved with an image quality, allowing you to upload it
on the Internet in higher image quality. The format supports
playback on a PC.

[MP4 640

360/25p]:

It will be saved with an image quality, allowing you to upload it
on the Internet faster. The format supports playback on a PC.

Summary of Contents for HC-V785































































































































































































































Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands

Panasonic HC-V785, Operating Instructions Manual

Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands