Panasonic HC-V785 Page 92 Operating Instructions Manual Download

Page: 92 / 222

- 92 -

∫

Playback time setting

Touch the playback time.

≥

The playback time of [AUTO] is a maximum of approx. 5 minutes.

≥

Playback time may become shorter than the setting, or it may not even be played back if the part
recognised as clearly recorded is short.

∫

Setting up the title

Touch

to select your favourite title sheet.

≥

Title and date will not be displayed when [NONE] is selected.

Touch [TITLE].

Enter the title.

≥

Touch the text entry icon in the centre of the screen and enter the
title.

≥

After entering the title, touch [Enter].

Entering text

≥

The characters can be conveniently input without moving the cursor when the [Auto Cursor
Position] is set to [ON]. (

)

≥

A maximum of 18 characters can be entered.

Touch [ENTER] to end registration.

≥

The date of the first scene of the Highlight Playback will be displayed as the date.

≥

The entered title will be cleared when the unit is turned off or the Highlight Playback is finished.

[APPROX 90 SEC.]/[APPROX 3 MIN.]/[AUTO]

[NONE]/[PICTURE 1]/[PICTURE 2]/[PICTURE 3]/[PICTURE 4]



Text entry icon

Icon

Description of operation

[A] etc.

Enters a character.

Moves the cursor to left or right.

[A/a/1]

Switches between [A]/[a] (alphabet) and [&/1] (symbols/numbers).

Enters a space.

[Delete]

Deletes a character.
Deletes the previous character if the cursor is in an empty space.

[Enter]

Ends text entry.

Summary of Contents for HC-V785































































































































































































































Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands

Panasonic HC-V785, Operating Instructions Manual

Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands