Panasonic HC-V785 Page 62 Operating Instructions Manual Download

Page: 62 / 222

- 62 -

This function enhances optical image stabilization. You can further reduce the effects of the
shake that tends to occur when using zoom.

Touch

to turn the Image Stabilizer on. (

)

Select the menu.

≥

The default setting is [AUTO]. When [AUTO] is set,

is not displayed in the Touch Menu.

(When [MANUAL] is selected)

Touch and hold

≥

Icon is displayed in

while you are touching and holding

≥

Optical Image Stabilizer Lock is released when you remove your finger from the icon.

∫

To make the display of

disappear

When [MANUAL] is set,

stays displayed even if it is left unused. To hide the

display,

change the [O.I.S. LOCK DISPLAY] setting.

≥

Stabilization may not be possible under strong shaking conditions.

≥

To record while moving the unit quickly, release Optical Image Stabilizer Lock.

Optical Image Stabilizer Lock

: [RECORD SETUP]

[O.I.S. LOCK SETTING]

desired setting

[AUTO]:

Operates Activates Optical Image Stabilizer Lock automatically. The

icon is displayed in the position

of the LCD monitor.

[MANUAL]:

Operates Optical Image Stabilizer Lock while

is touched and held.



MENU

: [SETUP]

[O.I.S. LOCK DISPLAY]

desired setting

[ON]:

Constantly display.

[OFF]:

The icon will disappear after approx. 5 seconds without any touch operation.

MENU

Summary of Contents for HC-V785































































































































































































































Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands

Panasonic HC-V785, Operating Instructions Manual

Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands