Panasonic HC-V777 Operating Instructions Manual Download

Page: 91 / 257

- 91 -

Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.

≥

This setting is retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.

≥

Switch to Manual Mode. (

)

Select the menu.

Touch the desired setting items.

Touch

to adjust settings.

Touch [ENTER].

≥

Touch [EXIT] to complete the settings.

≥

appears on the screen.

∫

Adjusting the picture quality with the Multi Manual Dial

Push the Multi Manual Dial.

≥

When an item on the picture quality adjustment icon or the manual icon (

) is not selected,

each time you push the Multi Manual Dial, the picture quality adjustment icon and the manual
icon are displayed alternately. Display the picture quality adjustment icon.

Rotate the Multi Manual Dial to select an item.

Push the Multi Manual Dial to set.

Rotate the Multi Manual Dial to adjust the
setting.

[PICTURE ADJUST]

: [RECORD SETUP]

[PICTURE ADJUST]

[SHARPNESS]:

Sharpness of the edge

[COLOUR]:

Depth of the colour of the image

[EXPOSURE]:

Brightness of the image

[WB ADJUST]:

Picture colour balance

MENU

MNL

Picture quality
adjustment icon

[SHARPNESS]
[COLOUR]
[EXPOSURE]
[WB ADJUST]

MNL



[EXPOSURE]

Summary of Contents for HC-V777


































































































































































































































































Search results

Summary of Contents for HC-V777

Reviews:

Related manuals for HC-V777

Brands by name

Popular brands

Panasonic HC-V777, Operating Instructions Manual

Search results

Summary of Contents for HC-V777

Reviews:

Related manuals for HC-V777

Brands by name

Popular brands