background image

- 123 -

 series/

 series/

 series

You can convert and copy AVCHD scenes, scenes recorded as Backup for Twin Camera, and MP4 
scenes. The image quality will be converted into a format that supports playback on a PC and online 
sharing (MP4 (1280

k

720/25p) or MP4 (640

k

360/25p)).

You can convert and copy AVCHD scenes and MP4 scenes. The image quality will be converted 
into a format that supports playback on a PC and online sharing (MP4 (1280

k

720/25p) or MP4 

(640

k

360/25p)).

 series/

 series

4K MP4 scenes can also be converted to high-definition picture quality (MP4 (1920

k

1080/25p)) 

scenes and copied.

Scenes recorded in iFrame or saved as MP4 (640

k

360/25p) cannot be converted to MP4.

1

Select the menu.

2

Touch the scene you want to convert.

The scene selection is made as you touch it, and the 

 indication appears on the thumbnail. To 

cancel the operation, touch the scene again.

You can select up to 99 scenes in succession.

3

Touch [Enter].

4

Select the quality after conversion.

MP4 scenes after conversion are saved to the same media as the scenes before conversion.

5

Touch [YES].

To continue converting scenes to MP4, repeat steps 2 to 5.

Advanced (Playback)

Convert to MP4

: [EDIT SCENE] 

#

 [CONVERT TO MP4]

[FHD(1920

k

1080/25p)]

*1

:

Convert to MP4 (1920

k

1080/25p) and copy.

[HD(1280

k

720/25p)]

*2

:

Convert to MP4 (1280

k

720/25p) and copy.

[VGA(640

k

360/25p)]:

Convert to MP4 (640

k

360/25p) and copy.

*1

 series/

 series

This quality is displayed only when a 4K MP4 scene is selected.

*2 You cannot convert and copy MP4 [720/25p] scenes.

WX970

VX870

V770

V760

WX970

VX870

MENU

WX970

VX870

Summary of Contents for HC-V777


































































































































































































































































Reviews: