Panasonic HC-V760 Operating Instructions Manual Download

Page: 51 / 257

- 51 -

(When [FOCUS] is touched)

Touch [AF] or [AFS].

≥

The centre of the Sub Window will be focused.

≥

If you select [AFS],

will be constantly displayed on the recording screen.

(When

is touched)

Touch

≥

Touching the screen returns you to the recording screen.

≥

When Narration Mode is enabled, its icon will be constantly
displayed on the screen.

≥

You can enable or disable Narration Mode by touching

on the recording screen.

≥

Narration Mode uses the following settings, and they
cannot be changed.

[SURROUND] in [MIC SETUP], if [5.1ch/2ch] is set to [5.1ch]

[STEREO MIC] in [MIC SETUP], if [5.1ch/2ch] is set to [2ch]

≥

[Sound Scene Select] is not available in Narration Mode.

≥

If you hide the Sub Window, Narration Mode will not work.

(When

is touched)

Touch the desired frame.

≥

series/

series

When [REC FORMAT] is set to [4K MP4] or this unit is in 4K Photo Mode, no frame is displayed
and the frame setting cannot be changed.

≥

If you set the Recording Mode to Intelligent Auto Mode/Intelligent Auto Plus Mode, the following
settings will be used:

[WB] :

(Auto)

: The value will be set to [0].

[FOCUS] : AF (Auto Focus)

[AF] (Auto Focus):

Auto Focus works continuously.

[AFS] (Auto Focus Single):

Auto Focus works each time you touch [AFS].

Enables Narration Mode.

Disables Narration Mode.

: Pink

: Green

: Orange

: Grey

: Drop shadow

: No frame

* This adds a drop shadow on the right and bottom sides.







[Narration Mode]

[ON]

[OFF]





  





[FRAMING]

WX970

VX870

AWB

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands