Panasonic HC-V760 Operating Instructions Manual Download

Page: 111 / 257

- 111 -

∫

To save a manually-edited scene

You can save manually edited scenes as a single scene.

The recorded scenes can be saved in the SD card.

The recorded scenes can be saved in the built-in memory.

Stop the playback of a manually-edited scene or wait until the playback is
finished.

Touch [SAVE].

Select the format to save.

(When [AVCHD 1920

1080/50i] is selected)

≥

Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE])
and saved.

≥

Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.

Touch [YES].

≥

If you are using the battery, a message recommending that you use the AC adaptor will be
displayed. To start the saving operation, touch [START].

Touch [EXIT].

Touch [COPY] or [EXIT].

≥

Scenes saved in the built-in memory can be copied to the SD card. To copy to the SD card,
select [COPY].

≥

Operate according to the message and touch [EXIT] at the end.

≥

You can save scenes even when using the battery, but we recommend that you use the AC
adaptor.

≥

series/

series

Manually-edited scenes recorded as Backup for Twin Camera will be saved as normal AVCHD or
MP4 scenes.

≥

For information on the approximate free space requirements for saving a manually edited scene,
refer to page

109

[AVCHD 1920

1080/50i]:

It will be saved in high-definition image quality.

[MP4 1280

720/25p]:

It will be saved with an image quality, allowing you to upload it on
the Internet in higher image quality. The format supports playback
on a PC.

[MP4 640

360/25p]:

It will be saved with an image quality, allowing you to upload it on
the Internet faster. The format supports playback on a PC.

WX970 WX979 VX870 VX878

V770 V777 V760

WX970M VX870M

V770M

WX970 WX979 VX870 VX878

V770 V777 V760

WX970M VX870M

V770M

WX970

VX870

V770

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands