79
VQT3Y41
4
Adjust the lens attachment part following the instructions on the
screen.
5
Touch [EXIT] to end the adjustment.
≥
When re-attaching the 3D Conversion Lens or after an impact etc., it is
recommended that you perform the adjustment again.
6
(When recording motion picture)
Press the recording start/stop button to start recording.
(
l
31
)
≥
Start recording after removing the Lens front cap.
(When recording still picture)
Press the
button to take the picture.
(
l
33
)
≥
appears on the screen.
≥
It is possible to record still pictures while recording motion pictures. (Simultaneous
recording)
≥
The number of recording pixels are
(1920
k
1080). (
l
70)
≥
Use of a tripod is recommended for recording with a stable picture.
≥
[ECONOMY (BATT)]/[ECONOMY (AC)] will not work while you adjust the 3D Conversion
Lens attachment position.
≥
When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW
SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (
l
67)
≥
While 3D recording if moving the unit fast, the message is more likely to appear.
≥
The LCD monitor on this unit will not display in 3D.
≥
If the unit is turned on in the shade, etc., the screen may appear to be blue. In such a case,
removing the lens cap will return the screen to normal.
To ensure that the 3D image can be safely viewed, pay attention to the following
points when recording.
≥
Where possible, record with the unit in a horizontal state.
≥
Do not get too close to the subject. (record from a distance of at least 1.2 m (3.9 feet).)
≥
When moving the unit as you record, move it slowly.
≥
Try to hold the unit as steady as possible when recording while riding in a vehicle or
walking.
3D
2.1
M
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 79 ページ ２０１１年１２月２８日 水曜日 午前１０時２１分
