- 189 -
Some optional accessories may not be available in some countries.
You can attach the Suction Cup Mount (VW-SCA100) as follows.
≥
For information on how to mount the Video Camera Mount (For Handlebar) RP-CMC10E, refer to
the operating instructions for it.
∫
When attaching the Suction Cup Mount
1
Align tripod receptacle
A
of this unit
with camera screw
B
of the suction cup
mount.
2
Turn camera lock dial
C
of the Suction
Cup Mount in the direction of the arrow
(the LOCK side) to lock it.
≥
Hold this unit with your fingers to prevent it from
turning with the dial.
∫
When removing the Suction Cup Mount
To remove the suction cup mount, perform the steps for mounting it in reverse order.
≥
The screen may shake during recording. We recommend that you record an image as follows:
j
Close the LCD monitor during recording (The recording will continue)
j
Set the zoom magnification to 1
k
j
[O.I.S.] is set to
(
)
≥
Depending on recording conditions, even if you record the image as described above, the screen
may shake.
≥
If you experience fatigue, a feeling of discomfort or other symptoms when playing back a scene
recorded with the Suction Cup Mount/Video Camera Mount (For Handlebar), stop the playback.
Optional accessories
About the Suction Cup Mount/the Video Camera Mount (For
Handlebar)
UNLOCK
LOCK
