- 116 -
Using [Remote Ctrl] with a direct connection
∫
If the device is Android (NFC-compatible)
≥
Set the NFC function of the smartphone to on.
1
Start up the smartphone application “Image App”.
2
Touch the smartphone on
of this unit.
≥
Touch the NFC touch area when the NFC mark is displayed on
the smartphone screen.
≥
If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
of this unit again.
≥
If the unit is not recognised even when touching the smartphone,
change positions and try again.
≥
The connection cannot be established while this unit is recording.
≥
When the connection is complete, images of this unit is displayed on the smartphone screen.
≥
This unit is turned on even if it touches the smartphone on
of this unit, where this unit is
turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥
The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
∫
If the device is Android (non-NFC-compatible) or iOS
Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi
Setup] (
).
1
Press Wi-Fi button on this unit and touch [Remote Ctrl].
≥
It will go into connection standby for remote operation.
2
Start up the smartphone application “Image App”.
≥
When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
≥
The message is displayed. Touch [YES] to close the indication.
≥
After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on
of this unit. (If you have turned off this unit
with the power button, this unit will not turn on by touching the smartphone on
of this unit)
≥
If you touch an NFC-compatible smartphone on this unit, you can register up to five smartphones.
When the number exceeds five, registrations will be deleted, starting from the oldest touched one.
≥
Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.
