Panasonic HC-V201P, Service Manual

Page: 26 / 66

26
6 Service Mode
1. Indication method of the service menu
Set the mode switch “Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
NOTE:
Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Press the [ MENU ] button to end the service mode, and then POWER OFF.
Screen display Contents Function
1 Factory settings Function to throw a product up in a factory shipment state
(When recorded data in Built-in memory, “error display” is done)
3 Built-in memory self check execution
(HC-V210M only) Function to check self as for the state of Built-in memory
4 Lock search history indication Display the camera system error cord for three histories saved
in EEPROM
5 Power ON self check result display Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
10 Erasing the lock histories Erasing the error histories (working time is not erased)
12 Camera data indications while the
video playback Display the camera informations (Shutter speed, Iris value,
White balance and focal length) while playing recorded video
14 Adjutment function for the service The service adjustment do setup and adjustment of the follow-
ing items required in the field service.
15 Restore the backed up adjustment data Restore the adjustment data to new or repaired Main P.C.B.
from SD card that the data backed up from original Main P.C.B.
before repairs or replacement.