background image

- 78 -

The scenes put together as a Highlight Playback can be saved as a single scene.
The recorded scenes can be saved in the SD card.

1

Stop the playback of the Highlight Playback or wait until the Highlight 
Playback is finished.

2

Touch [SAVE].

3

Select the format to save.

(When [AVCHD 1920

k

1080/50i] is selected)

Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE]) 
and saved.

Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.

4

Touch [YES].

5

Touch [EXIT].

 is displayed on the thumbnail of the scenes saved by the Highlight Playback.

Saving the Highlight Playback

[AVCHD 1920

k

1080/50i]:

It will be saved in high-definition image quality.

[MP4 1280

k

720/25p]:

It will be saved with an image quality that allows you to 
upload it on the Internet in higher image quality. The format 
supports playback on a PC.

[MP4 640

k

360/25p]:

It will be saved with an image quality that allows you to 
upload it on the Internet faster. The format supports 
playback on a PC.

Summary of Contents for HC-V180














































































































































Reviews: