- 139 -
j
The recording location is dark
j
Bright light is detected (sky, TV, lamp, etc.)
j
The subject is moving too fast, or not moving
j
The area being recorded is close to a window
≥
Depending on recording conditions, scenes may not be recorded as intended. In such cases, we
recommend setting the mode to [Manual].
(About [Moving Object])
≥
When recording starts, a moving subject will be detected. Before recording, point the camera at
the subject.
≥
This unit cannot track more than one subject simultaneously.
≥
Certain types of subjects, such as a fast moving subject, may not be tracked.
When the Remote Pan Tilt Cradle is connected to this unit, the Remote Pan Tilt Cradle setup menu
can be set.
≥
Connecting the Remote Pan Tilt Cradle to this unit (
1
Touch [SETUP] in the Remote Pan Tilt Cradle Mode screen.
2
Touch desired menu item.
Set the left/right pan range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object].
Set the up/down tilt range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object].
Set the up/down operation speed of the Remote Pan Tilt Cradle.
Remote Pan Tilt Cradle settings
[Panning Angle]
[±180°]/[±90°]/[±45°]/[Stationary]
[±180°]:
Pans to the left/right up to approx. 180
o
.
[±90°]:
Pans to the left/right up to approx. 90
o
.
[±45°]:
Pans to the left/right up to approx. 45
o
.
[Stationary]:
Panning to the left/right is off.
[Tilt Angle]
[±15°]/[Stationary]
[±15°]:
Tilts up/down up to approx. 15
o
.
[Stationary]:
Tilting up/down is off.
[Tilt Speed]
[High]/[Normal]
