- 50 -
≥
To return to Auto White Balance Mode, press the WHITE BAL button or switch to Intelligent Auto
Mode using the iA/MANU switch.
≥
It is not possible to change the white balance mode in the following situations:
j
When [SCENE MODE] is set to [Beach]/[Sunset]/[Fireworks] (
)
j
During Freeze Frame (
You can set ATW Lock by registering [ATW LOCK] to a USER button.
≥
for details about setting the USER button.
1
Set the White Balance mode to [ATW].
≥
Press the WHITE BAL button if a setting other than [ATW] is selected.
2
Press the USER button to which [ATW LOCK] is registered or touch the
applicable USER button icon.
≥
To cancel ATW Lock, press the USER button or touch the USER button icon again. Canceling
ATW Lock will return the White Balance mode back to [ATW].
≥
ATW Lock is not available except when the White Balance mode is set to [ATW].
≥
It will be canceled when the unit is turned off.
Setting the White Balance mode to [VAR] allows you to set a White Balance value between 2000K
and 15000K.
≥
Use the jog dial to change the settings.
≥
Switch to Manual Mode. (
1
Set the White Balance mode to [VAR]. (
)
2
Push the jog dial.
3
Rotate the jog dial to adjust the color balance.
4
Push the jog dial to finish the adjustment.
To set ATW Lock
To finely adjust the White Balance
HC-PV100_GC_GW_SQW0750-1_mst.book 50 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
