- 44 -
Perform focus adjustments using the focus ring. If auto focusing is difficult due to the conditions,
then use Manual Focus.
≥
Switch to Manual Mode. (
1
Press the FOCUS A/M/
¶
button to enable Manual Focus.
≥
It will switch to MF from AF.
2
Adjust the focus by rotating the focus ring.
≥
The focus value can be set from MF00 (focus distance: approximately 3 cm) to MF99 (focus
distance: infinity). The larger the focus value gets, the further the position where focus is
achieved.
≥
If you press and hold the FOCUS A/M/
¶
button, focus will be adjusted to MF95 on the infinity
side.
≥
To return to Auto Focus, press the FOCUS A/M/
¶
button or set this unit to Intelligent Auto Mode
using the iA/MANU switch.
≥
When the distance to the subject approaches within 1.5 m approx., the unit switches to the macro
range and
or
. (The unit may switch to the macro range even when the distance to the
subject is 1.5 m or more depending on the subject.).
≥
Depending on the zoom magnification, this unit may fail to switch to the macro range, or go to a
non-displayed focus value.
≥
When you perform a zoom operation in the macro range, this unit may go out of focus.
≥
This item cannot be set during Freeze Frame. (
∫
To emphasize the outline of images
Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of
an image displayed on the LCD monitor and viewfinder.
You can also adjust the emphasis level or change the frequency.
≥
You can also enable or disable this function with the applicable USER button. (
)
≥
These settings will not affect the images actually recorded.
Focus
: [DISP SETUP]
#
[EVF/LCD DETAIL]
#
[ON]
A
FOCUS A/M/
¶
button
B
Focus ring
FOCUS
A/M/
∞
MENU
HC-PV100_GC_GW_SQW0750-1_mst.book 44 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
