Panasonic HC-PV100 Operating Instructions Manual Download

Page: 117 / 160

- 117 -

This sets the aspect ratio of images to be recorded with a [REC FORMAT] setting of [SA 576/
50.00i].

≥

Set [REC FORMAT] to [SA 576/50.00i]. (

115

)

≥

This function is not available in the following cases:

When [REC FORMAT] is set to an option other than [SA 576/50.00i] (

115

)

During Freeze Frame (

)

This sets the camera number for this unit.

Touch [CAMERA NUMBER SET].

Touch

to change the Camera Number.

≥

Numbers between 0 and 9 can be set.

Touch [RETURN].

≥

Touch [EXIT] to exit the menu screen.

≥

This function’s default setting is “0”.

[ASPECT CONVERT]

[SIDE CROP]:

Records images in standard 4:3 mode. The sides will be cut off.

[SQUEEZE]:

Records images by compressing images in the horizontal direction. When
recorded images are played back on a wide-screen TV, they appear in the 16:9
aspect ratio.

[CAMERA NUMBER SET]

HC-PV100_GC_GW_SQW0750-1_mst.book 117 ページ２０１８年１１月１６日　金曜日　午後５時１４分

Summary of Contents for HC-PV100

































































































































































Search results

Summary of Contents for HC-PV100

Reviews:

Related manuals for HC-PV100

Brands by name

Popular brands

Panasonic HC-PV100, Operating Instructions Manual

Search results

Summary of Contents for HC-PV100

Reviews:

Related manuals for HC-PV100

Brands by name

Popular brands