Panasonic HC-MDH3, Owner'S Manual

Page: 80 / 160

- 80 -
≥
Register <AUTO REC> to a USER button. (
l
66 )
This enables/disables a function that controls recording performed with an external device
(recorder, etc.) connected to this unit.
1 Select the [HDMI TC OUTPUT] menu.
2 Select the [REMOTE REC] menu.
3 Select the [REMOTE REC LINK] menu.
4 Press USER button or touch USER button icon in the recording screen.
≥ When is displayed, signals will be transmitted, prompting the external device to start
recording.
≥ To stop the recording being performed with the external device, press the applicable USER
button or touch the applicable USER button icon again. When
is displayed, signals will
be transmitted, prompting the external device to stop the recording.
≥
Register <O.I.S.> to a USER button. (
l
66 )
This enables/disables the Image Stabilizer. ( l 83 )
≥
Register <ZEBRA> to a USER button. (
l
66 )
You can switch between the zebra and marker displays. ( l 84 )
≥
Register <PICTURE TONE> to a USER button. (
l
66 )
Changes the contrast of the overall image.
Press USER button or touch USER button icon in the recording screen.
≥
Switches the setting each time the button is pressed.
[STANDARD]
!#
[SHARP]
≥ The setting is also applied to the menu item [PICTURE TONE].
<AUTO REC>
: [OUTPUT SETUP] # [HDMI TC OUTPUT] # [ON]
: [OUTPUT SETUP] # [REMOTE REC] # [ON]
: [OUTPUT SETUP] # [REMOTE REC LINK] # [OFF]
<O.I.S.>
<ZEBRA>
<PICTURE TONE>
[STANDARD]: This mode is standard image setting.
[SHARP]: This mode is high-contrast image setting for both color and
luminance.
MENU
MENU
MENU