- 113 -
The used space and remaining recordable time of the SD card and built-in memory can be checked.
≥
Selecting [CHANGE MEDIA] and pressing the button in the centre switches the unit between the
display for the SD card 1 and the display for the SD card 2.
≥
Selecting [CHANGE MEDIA] and pressing the button in the centre switches the unit between the
display for the SD card and the display for the built-in memory.
≥
When the mode switch is set to
, remaining recordable time for the selected recording format
is displayed.
≥
Select [EXIT] and press the button in the centre to close the indication.
≥
The SD card or built-in memory requires some space to store information and manage system
files, so the actual usable space is slightly less than the indicated value. The usable SD card/built-
in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this
unit, PCs and software are expressed as 1 GB=1,024
k
1,024
k
1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
The recording lamp lights up during recording.
When this is set to [OFF], it does not light during recording.
The ring LED lights up blue in Motion Picture Recording Mode or Still Picture Recording Mode.
≥
When [5 SECONDS] is set, the ring LED lights up for 5 seconds after the unit is turned on or the
recording mode is switched.
≥
When [RING LED (RED)] is set to [ON], the ring LED does not light up blue during recording.
The ring LED lights up red during recording.
≥
When the [REC LAMP] is set to [OFF], this item cannot be set.
[MEDIA STATUS]
[REC LAMP]
[ON]/[OFF]
[RING LED (BLUE)]
[ON]/[5 SECONDS]/[OFF]
[RING LED (RED)]
[ON]/[OFF]
HC-MDH2
HC-MDH2M
