Panasonic GX740Z Ehelp Download Page 124

Page: 124 / 323

Setting for USB HDD

Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device are listed.

●

Please note that USB HDD will be formatted and all data in it will be

erased after this setup.

●

Before setting, connect the USB HDD and be sure to turn on the USB

HDD.

Recording > USB HDD setup > Preparations

1. Display the menu with

2. Select

Setup

USB Device Setup

and press

to access.

3. Select the USB HDD for recording and press

to start setup.

●

Some USB HDD may not be displayed.

●

To display information of the highlighted device

INFO

4. When the caution and confirmation screen for using USB HDD is

displayed, select

Yes

and press

to proceed.

5. When a confirmation screen of USB HDD name is displayed, select

Yes

and press

to set.

●

The name for the USB HDD is created automatically. If you want to edit

the name, select

Yes

1) Enter characters with

Cursor buttons

Numeric buttons

, and press

to set.

2) Press

RETURN

to store.

6. When a confirmation screen to enable USB HDD for recording is

displayed, select

Yes

and press

to set.

●

If another formatted USB HDD for recording already exists, this

confirmation screen will be displayed to switch to enable this USB HDD

for recording.

- 124 -

Summary of Contents for GX740Z




































































































































































































































































































































Search results

Summary of Contents for GX740Z

Reviews:

Related manuals for GX740Z

Brands by name

Popular brands

Panasonic GX740Z, Ehelp

Search results

Summary of Contents for GX740Z

Reviews:

Related manuals for GX740Z

Brands by name

Popular brands