Panasonic GT703, User Manual

Page: 38 / 105

Installation and Wiring
3-14
3.5 Options
3.5.1 Time for Replacement of Battery
When replacing the battery for the clock, turn on electricity for the time for energization, and
replace the battery with a new one within one minute after turning off the power supply.
If the battery is not replaced within the replacing time, the clock will be initialized.
Time for
energization
Time for
replacement
1 min. or more Within 1 min.
3.5.2 Replacement of Front Panel Protective Sheet

About the front panel protective sheet
Use the separately-sold protective sheets to protect the touch panel surface and to keep it
clean.

Replacement of Front Panel Protective Sheet
Remove the peel-off film attached to the front panel protective sheet.
Attach the front panel protective sheet.
Attach the front sheet to fit the liquid crystal part of GT.
At this time, try not to allow the air to get in the attached face.
If the air was in, remove the air to be out with fingers.
Do not press the front panel hard as it may cause the damage to the touch switch.