manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 210

7.7 Program Creation Support Functions

This section explains the program creation support functions used to create programs.

7.7.1 Bookmark

The bookmark function allows the cursor to move to bookmarked locations.
The bookmark function can be used in all programs other than SFC programs.
This section explains the procedures for setting bookmarks and moving the cursor between

bookmarks, using an LD program as an example.

1.

Select the network (circuit) where you want to set a bookmark. From the menu bar, select

Edit

>

Bookmarks

>

Toggle Bookmark

, or click the <Ctrl> key + <F12> key simultaneously.

A bookmark ( ) will be set in the selected network (circuit).
Performing the above operation again clears (deletes) the set bookmark.

2.

To move to the next bookmark, press the <F12> key. To move to the previous bookmark,

press the <Shift> key + <F12> key simultaneously.

● To clear (delete) all the set bookmarks, from the menu bar, select 

Edit

>

Bookmarks

>

Clear All

Bookmarks

.

● You can also perform bookmark operations by clicking appropriate icons on the toolbar.

No.

Item

(1)

Toggle Bookmark

(2)

Previous Bookmark

(3)

Next Bookmark

(4)

Clear All Bookmarks

7.7.2 Call Tree View

Opening the Call Tree view enables the user to search the callers and callees of blocks such as

functions, function blocks, or POU.

7.7 Program Creation Support Functions

7-44

WUME-GM1RTXOP-01

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands