manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 143

6.4 Types of Programming Language

GM Programmer supports five programming languages that comply with IEC 61131-3, the

international standard for PLC programming languages.

● Continuous Function Chart (CFC) and Page-Oriented CFC are not included in the five

programming languages compliant with IEC 61131-3. However, the third edition of IEC 61131-3
defines them as object-oriented programming languages.

■

Ladder Diagram program (LD program)

Ladder Diagram is a graphical programming language used to create a program by arranging

ladder logic elements such as contacts and coils on a network (circuit). It also allows the use of

functions and function blocks with various functions.

■

Structured Text program (ST program)

Structured Text is a programming language that creates expressions, conditional statements,

and other program elements in text format. It is based on the Pascal programming language

and suitable for numerical calculation, data processing, and processing such as conditional

branch and repetitive processing.

■

Sequential Function Chart program (SFC program)

Sequential Function Chart is a graphical programming language used to create a program by

arranging steps, transitions, actions, and other elements sequentially from top to bottom. It is

suitable for processing that describes state transitions.

6.4 Types of Programming Language

WUME-GM1RTXOP-01

6-15

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands