420
14.2.2.7 Configuration Backup to FTP Servers
14.2.2.7
Configuration Backup to FTP Servers
Use the following window to save a backup copy of the switch
configuration into an FTP server.
Choose
Tool > Configuration Recovery
＆
Backup > Configuration
Backup to an FTP Server
on the tool-bar
to display the following
window.
Figure 14-16 Configuration Backup to the FTP Server
You can configure the following parameters.
Click
Backup
to start making a backup.
Parameter
Overview
FTP Server IP
Enter an IP address of an FTP server.
TCP Port (1-65535)
Enter the TCP port of the FTP connection.
Username
Enter the user-name of the FTP connection. The number
of characters for the name can be up to 32.
Password
Enter the password of the FTP connection. The number
of characters for the name can be up to 15.
Source File
Enter the source-file name and its path of a
configuration file on a switch.
The number of characters
for this field can be up to 64.
• If you choose the
running-config
option, the
configuration file, which is in progress of being
executed by a switch, is backed up.
• If you choose
startup-config
option, the start-up
configuration file on a switch is backed up.
Destination File
Enter the destination path and its location on the RCP
server where a configuration file is saved. The number
of characters for this field can be up to 64.
Summary of Contents for GA-ML Series
