416
14.2.2.3 Configuration Recovery from FTP Servers
14.2.2.3
Configuration Recovery from FTP Servers
Use the following window to recover the configuration of a switch from
an FTP server.
Choose
Tool > Configuration Recovery
＆
Backup > Configuration
Recovery from an FTP Server
on the tool-bar
to display the following
window.
Figure 14-12 Configuration Recovery from the FTP Server
You can configure the following parameters.
Click
Restore
to start restoring.
Parameter
Overview
FTP Server IP
Enter an IP address of an FTP server.
TCP Port (1-65535)
Enter the TCP port of the FTP connection.
Username
Enter the username of the FTP connection. The number
of characters for the name can be up to 32.
Password
Enter the password of the FTP connection.
The number
of characters for the name can be up to 15
.
Source File
Enter the path and name of a source file of a
configuration file existing in an FTP server. The number
of characters for this field can be up to 64.
Destination File
Enter the destination path and its location on the switch
where a configuration file is saved. The number of
characters for this field can be up to 64.
• If you choose the
running-config
option, the
configuration file, which is in progress of being
executed by a switch, is recovered and overwritten.
• If you choose
startup-config
option, the start-up
configuration file on a switch is recovered and
overwritten.
Replace
If you choose this option, a configuration file on a
switch is replaced using the file.
Summary of Contents for GA-ML Series
