background image

3

This chapter contains important safety instructions for preventing bodily injury 
and/or property damage. Please read carefully, and follow them at all times.

 

Do not use power supply other than AC 100 - 240 V.

  Deviation could lead to fire, electric shock, and/or equipment failure.

 

Do not handle the power cord with wet hand.

  Deviation could lead to electric shock, and/or equipment failure.

 

Do not handle this Ethernet Switch and connection cables during a 
thunderstorm.

  Deviation could lead to electric shock.

 

Do not disassemble and/or modify this Ethernet Switch.

  Deviation could lead to fire, electric shock, and/or equipment failure.

 

Do not damage the power cord. Do not bend too tightly, stretch, twist, bundle 
with other cord, pinch, put under a heavy object and/or heat it.

  Damaged power cord could lead to fire, and/or electric shock.

 

Do not insert, or drop foreign objects such as metal or combustible things into 
Ethernet Switch from the openings or twisted pair ports.

Deviation could lead to fire, electric shock, and/or equipment failure.

 

Do not connect equipments other than 10BASE-T/100BASE-TX/1000BASE-T 
to twisted pair port.

 

When connecting to a 10BASE-T device, use a Cat5 or above cable.

  Deviation could lead to fire, electric shock, and/or equipment failure.

 

Do not place this Ethernet Switch in harsh environment (such as near water, 
high humid, and/or high dust).

  Deviation could lead to fire, electric shock, and/or equipment failure.

 

Do not place this Ethernet Switch under direct sunlight and/or high 
temperature.

  Deviation could lead to high internal temperature and fire.

This symbol indicates a potential hazard 
that could result in serious injury or death.

 

Severity of bodily injury and/or property damage, which could result from incorrect 
use of the Ethernet Switch, are explained below.

 

The following symbols are used to classify and describe the type of instructions to 
be observed.

Important Safety Instructions

WARNING

CAUTION

This symbol indicates safety instructions. 
Deviation from these instructions could lead 
to bodily injury and/or property damage.

 

This symbol is used to alert 
users what they must do.

This symbol is used to alert 
users what they must not do.

 

WARNING

 

 

Summary of Contents for GA-AS4T Series


















Reviews: