14
1.4.
Part Names and Functions
Figure 1-1 External View (Example: GA-)
● Power port
Connect the supplied power cord into the port and connect the other end into
an electric outlet (AC 100-240 V).
● Power cord hook block
Hooking the supplied power cord on the block makes the cord less likely to be
unplugged from the power port.
● Ground terminal screw
If the electric outlet is not grounded, connect the grounding line (AWG18:
green/yellow) to the ground terminal screw.
● 10BASE-T/100BASE-TX/1000BASE-T ports (all ports)
10BASE-T/100BASE-TX/1000BASE-T compatible terminals, hubs, repeaters,
bridges, and switching hubs can be connected.
The length of the twisted pair cable (Cat5e or higher) connecting this switch
and a device must be 100 m or shorter.
● PoE power supply supported ports
(For GA-, GA-A, and GA-A; downlink ports)
Supports PoE power supply to IEEE802.3at/af compatible devices.
10BASE-T/100BASE-TX/1000BASE-T compatible terminals, hubs, repeaters,
bridges, and switching hubs can be connected.
The length of the twisted pair cable (Cat5e or higher) connecting this switch
and a device must be 100 m or shorter.
Back
Front
See next page for
enlarged figure
10BASE-T/100BASE-TX/1000BASE-T
Ground terminal screw
Manufacture number label
Power port
MAC address label
Power cord hook block
