Rear Expansion Area
You can select from the following options.
FZ-VCN401
FZ-VCN402
FZ-VCN403
VGA Port / Serial Port / 2nd LAN
Port
Serial Port / USB 3.2 Gen 1 (Type-A) Port /
HDMI Port
USB 3.2 Gen 1 (Type-A) Port / USB 3.2 Gen 1 (Type-A) Port /
HDMI Port
Inserting an option to the rear expansion area
1.
Turn off the computer and disconnect the AC adaptor.
IMPORTANT
l
We recommend that you turn off the computer completely the following.
1.
Click
(Start) - [Settings] - [System] - [Recovery].
2.
Click [Restart now] in “Advanced startup”.
3.
Click [Restart now] on the “We’ll restart your device so save your work” screen.
4.
Click [Turn off your PC].
2.
Remove the battery pack. (
<When using second battery pack>
l
Remove the second battery pack. (
3.
Slide the latch (A) to the arrow direction.
4.
Open the cover (B).
5.
Insert an option to the rear expansion area.
l
If an option has not been inserted, proceed to step 2.
1.
Remove the screws (C) and pull the tab (D) to pull out an option.
Use the PH 1 (PH #1) screwdriver.
