Panasonic FZ-G1 Series Operating Instructions - Reference Manual Download Page 104

Page: 104 / 145

Contactless Smart Card Reader/RFID Reader

You can read the data from RFID (Radio Frequency Identification) tags / Smart Card.

N O T E

This sensor is typically used with specialized applications. For further information, ask the system administrator.

It is necessary to equip the computer with the hand strap and the large corner guards. About the equipment, contact Panasonic Tech-
nical Support.

Align the RFID tags / Smart Card with the mark (A) and wave the RFID tags / Smart Card.

A Smart Card can be read from its front or reverse side. Try moving its position if it cannot be read.

Continue operation by using the specialized applications.

N O T E

Operation distance depends on RFID tag / Smart Card.

104

Summary of Contents for FZ-G1 Series


















































































































































Search results

Summary of Contents for FZ-G1 Series

Reviews:

Related manuals for FZ-G1 Series

Brands by name

Popular brands

Panasonic FZ-G1 Series, Operating Instructions - Reference Manual

Search results

Summary of Contents for FZ-G1 Series

Reviews:

Related manuals for FZ-G1 Series

Brands by name

Popular brands