Insert power cord plug into
power socket, then open
the control box cover and turn
on the main switch. (Fig.12)
Control panel
Air volume dial switch
Main switch
Port receptacle for add-on Module provides additional
features. (Module sold separately)
For details, please consult Panasonic Call Center
Telephone : 1-866-292-7299 (USA)
1-800-669-5165 (Canada)
”I” is on
“O” is off
Control box cover
Filter indicator
Running indicator
Filter reset button
Default setting : 80 CFM
9
OPERATION
Humidity dial switch
Default setting : 80 %RH
If the product inside humidity detected by sensor is over than setting value, the fan will
stop for 60 minutes, then according to the detected value to determine whether to
operate.
If the switch is turned to OFF position, the humidity sensor detection function will be
disabled.
Press the button after filter maintenance for resetting accumulated running time and the
filter indicator will light off, the buzzer will turn off.
Adjusting the product air volume by this dial switch, you can choose 50, 60, 70,
80, 90, 100, 110, 130, 150 CFM.
Adjusting the humidity protection value of the product by this dial switch, you can choose
from 30 %RH~80 %RH (stepless) or turned to OFF position.
When the indicator is on green, indicates the product is running.
The indicator will light on red when the accumulated running
time is up to 90 days. When the indicator is on (with buzzer
sound), indicates need to maintain filters.
(1)The indicator will be on when the product accumulated
running time reaches to 90 days. The buzzer will sound
every hour and 10 seconds in an hour.
(2)If you want to turn off the indication of buzzer, please
press filter reset button about 3 seconds until there is the
sound of a long beep. Press filter reset button about 3
seconds again until there is sound of two quick beeps, the
buzzer indication will be turned on again.
(3)If you want to cancel buzzer sound when sleeping, you
just need to turn off the wall switch. The buzzer will
continue to sound when the product is turned back on and
will not stop until the filter has been maintained and the
filter alarm has been reset.
(4)When the the running indicator or filter indicator blinks, means
the product failure.
Note
Fig.12
1
1
2
2
4
3
5
4
6
5
3
I
O