Panasonic FV-08VSL3, User Manual, Page: 6 / 12

2. Fix the flange of frame to joist by 2 long
screws(ST4.2x30), and fix the suspension
bracket to joist by 2 long screws(ST4.2x30).
(Fig.2)
4. Refer to wiring diagram.
Follow all the local electrical safety codes
as well as the National Electrical Code(NEC).
Using UL approved wire nuts , connect house
power wires to ventilating fan wires.
Fig.3
6
Live to black
(N. Light)
Live to black
(Light)
Neutral
to white
Mount junction box cover carefully so
that lead wires are not pinched.
Squeeze Neutral
to white
Joist
2 Long screws
(ST4.2x30)
2 Long screws
(ST4.2x30)
Fig.2
Fig.1
Adaptor
Damper
Tape
Accessory screws
Tape
Suspension bracket
Suspension
bracket
Note:
For wiring details, please refer to the wiring
diagram on page 5.
1. Before installation, remove the tape from
damper and adaptor, and check that the
damper can open and close smoothly. Then
remove the accessory screws from
suspension bracket. (Fig.1)
5. Squeeze the circular duct to fit the adaptor,
then slip onto the adaptor and secure it with
a clamp and seal it with approved duct tape
or mastic. (If using 3 inch round duct, please
purchase
from our
representative.)(Fig.3)
the 26 gauge steel Panasonic 4"
Oval - 3" Round Reducer
3. Remove junction box cover and secure
conduit or stress relief to junction box
knock-out hole.(Fig.3)
Joist
Joist
Knock-out hole