3
These products must be properly grounded.
Do not use these fans with any solid-state speed control device. Solid state controls may cause
harmonic distortion which can cause motor humming noise.
GENERAL SAFETY INFORMATION
CONTINUED
Make sure that the electric service supply voltage is AC 120V, 60Hz.
Prohibited
Prohibited
Prohibited
Prohibited
Extreme
bending
Bend
repeatedly
Duct
narrow
Floor
45
45
Cooking
equipment
(Cooking area)
Do not install above or
inside this area
Fig. B
The special-purpose or dedicated parts, such as mounting
fixtures, must be used if such parts are provided.
Not for use in cooking area. (Fig.B)
Do not install the unit where ducts are configured as shown
in Fig.A.
For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
Provide make up air for proper ventilation.
Do not kink the supply wiring.
Protect the supply wiring from sharp edges, oil, grease, hot surfaces,
chemicals or other objects.
Always disconnect the power source before working on or near the fan,
motor or junction box.
Follow all local electrical and safety codes, as well as the National
Electrical Code (NEC) and the Occupation Safety and Health Act (OSHA).
Do not install these ventilating fans where interior room temperature
may exceed 104°F(40°C).
These models are UL listed for tub and shower enclosures.
Canada only: Not to be installed in a ceiling thermally insulated to a value greater than R40.
Do not disassemble the unit for reconstruction. It may cause fire or electric shock.
A statement to the effect that when the product is to no longer be used, it must not be left
in place but remove, to prevent it from possibly falling.
Ceiling joist must be subjected to static load more than five times the weight of the product.
Do not install with a method which is not approved in the instructions.
WARNING
CAUTION
Bend near
adaptor
Adaptor
Fan body