Panasonic FP-XH M8N16PD, User Manual

Page: 273 / 556

15.2 Setting and Operation of Pulsar
15-9
15.2.2 Settings for Pulsar Operation
For using the pulsar operation, set the parameters in the two dialog boxes "Pulse input" and
"Parameter settings" of Configurator PM7.

Pulse input setting
Select "Pulsar" from the items of pulse input application.
Item Setting example Settable range
Pulse input application 0: Pulsar 0: Pulsar
Pulse input rotation
direction
0: Forward 0: Forward, 1: Reverse
Pulse input method 0: 2-phase input When using the pulsar, only "0: 2-phase input" can be set.
Pulse input multiplication 2: Multiply by 4 When using the pulsar, only "2: Multiply by 4" can be set.

Parameter settings menu
• For the item of the "pulsar operation code" of the axis on which the pulsar operation is
performed, select the channel number of the connected pulse input.
• The movement amount per an 1-pulse signal from the pulsar can be changed by setting the
ratio numerator and ratio denominator for the input signal of the pulsar.
Item Setting example Settable range
Operation setting code 0: Pulse input CH1
0: Pulsar input CH1, 1: Pulsar input CH2, 2: Pulsar input
CH3, 3: Pulsar input CH4
Pulsar operation ratio
numerator
2 1-32,767
Pulsar operation ratio
denominator
1 1-32,767
Pulsar input method
2: Speed restriction (time
hold)
0:Standard operation , 1: Speed restriction (pulse hold), 2:
Speed restriction (time hold)
Pulsar operation maximum
speed
500 pulse: 0 -2,147,482,624 pps