Panasonic FP E Series, User Manual

Page: 363 / 440

12-71
Num-
ber
Name Boolean Operand Description Steps
F11
P11 Block copy COPY
PCOPY S, D1, D2 The data of “S” is transferred to the all area
between “D1” and “D2”. 7
F12
P12 ICRD
PICRD
F12
Data read
from IC
card/ROM
ICRD
S1, S2, D The data stored in the expansion memory of the IC
card or ROM specified by “S1” and “S2” are
transferred to the area startign at “D”. 11
F13
P13 ICWT
PICWT
P13
Data write to
IC card/ROM
PICWT
S1, S2, D The data specified by “S1” and “S2” are transferred
to the IC card expansion memory area or ROM
starting at “D”. 11
F14
P14 Program
read from IC
memory card PGRD
PPGRD S The program specified using “S” is transferred into
the CPU from IC memory card and executes it. 3
F15
P15 16-bit data
exchange XCH
PXCH D1, D2 (D1)
→
(D2), (D2)
→
(D1) 5
F16
P16 32-bit data
exchange DXCH
PDXCH D1, D2 (D1+1, D1)
→
(D2+1, D2)
(D2+1, D2)
→
(D1+1, D1)
5
F17
P17 Higher/lower
byte in 16-bit
data
exchange SWAP
PSWAP D The higher byte and lower byte of “D” are
exchanged. 3
F18
P18 16-bit data
block
exchange BXCH
PBXCH D1, D2, D3 Exchange the data between “D1” and “D2” with the
data specified by “D3”. 7
Control instruction
F19 Auxiliary
jump SJP S The program jumps to the label instruction specified
by “S” and continues from there. 3
Binary arithmetic instructions
F20
P20 16-bit data
addition +
P+ S, D (D)+(S)
→
(D) 5
F21
P21 32-bit data
addition D+
PD+ S, D (D+1, D)+(S+1, S)
→
(D+1, D) 7
F22
P22 16-bit data
addition +
P+ S1, S2, D (S1)+(S2)
→
(D) 7