![background image](http://html.mh-extra.com/html/panasonic/f-vxl40h/f-vxl40h_operating-instructions-manual_256434030.webp)
30
Operatingmethods
Controlpanel
Child Lock button /
indicator
(
P.32
)
ECONAVI indicator
Air Volume button
/ indicator
Power Off / On button
“nanoe™” indicator
PM2.5 indicator
Clothes Refresh button /
indicator
(
P.32
)
Light sensor
Clean indicator
Humidity indicator
Humidifying indicator
Check indicator
ECONAVIindicator
●
The indicator is lit during ECONAVI operation.
(P.37)
(The indicator is lit when the air volume is set at
[ Auto] or [ Silent].)
●
ECONAVI operation can be turned off.
● During operation, press
and
simultaneously and hold for 3 seconds. (ECONAVI
indicator is turned off.)
●
To restart ECONAVI operation, press the buttons
simultaneously and hold for 3 seconds again. (ECONAVI
indicator is lit.)
PM2.5indicator
When the product detects PM2.5, the PM2.5 indicator
is lit and the clean indicator blinks red. Then, the clean
indicator changes from blinking to lit. (PM2.5 indicator
is lit when the product detects substances of the size
of 2.5 μm or less, such as cigarette smoke or dust.)
Humidityindicator
●
The indicator shows the status of ambient
humidity.
[ Lo] (red):
indicates the ambient humidity is low
(about 40 % or less).
[ Med] (green):
indicates the ambient humidity is moderate
(about 40 % to 60 %).
[ Hi] (red):
indicates the ambient humidity is high
(about 60 % or more).
Cleanindicator
The indicator shows the air pollution level detected
by dirt sensor. The sensitivity of the sensor can be
changed. (P.38 Q8)
(blue): indicates the air is clean.
(red-small): indicates the air is slightly dirty.
(red-large): indicates the air is dirty.
nanoe™indicator
●
The indicator is lit when nanoe™ is generated.
●
nanoe™ operation can be turned off.
●During operation, press
and
simultaneously and hold for 3 seconds. (The nanoe™
indicator is turned off.)
● To restart nanoe™ operation, press the buttons and hold
for 3 seconds again. (The nanoe™ indicator is lit.)
Checkindicator
When the abnormality occurs in the products, the
indicator is lit.
When the indicator is lit. → (P.
41
)
Lightsensor
Detecting indoor brightness with the light sensor, the
product adjusts the brightness of indicators of the control
panel and adjusts the air volume, automatically.
When the room becomes dark, for example during sleep,
the product operates "Sleep mode auto operation". (P.37)
(When the air volume is set at [High] or [Lo], the product
does not adjust the air volume even while "Sleep mode
auto operation" is set.)
Summary of Contents for F-VXL40H
Page 43: ...VXL40H 43 ...