Panasonic F-PXV35M Operating Instructions Manual Download Page 9

MAINT

ENANCE

Notice

If the product is used in a room (especially hotel) with strong odor such as aromatic smell, cigarette 

smoke or barbecue smell, these odors may adhere to the filter. When the adsorption capacity of filter 

reaches saturation, odor will also be blown out again with the wind because of excess adsorption. 

When there is above situation, please clean the HEPA composite filter. If the situation persists, please 

replace the HEPA composite filter and deodorizing filter, even if the filter replacement indicator is off. 

In addition, if often used in a room with strong odor, please open the windows to ventilate the room 

regularly. 

The filter which needs to exchange cannot be used again even it is cleaned, please dispose the 

used filter as non-flammable garbage.

Filter replacement 

After replacement, please connect power plug, then press                   button for about 3 seconds 
until the filter replacement indicator turns off, then the reset is completed.                                            
Fill in installation date on the label attached with filter, then stick it on product to cover the old 

date. (P.6)

When the product inhales the smoke of six 

cigarettes every day. (Japan Electrical 

Manufacturers’ Association JEM1467)

Conditions

When the filter replacement indicator lights 

on. (About once every 3 years)

Replacement 

period

(Optional accessories: back cover)

HEPA composite filter

Deodorizing filter

Filter replacement period may be 

shorten, depending on the environ-

ment (such as where smoking is 

frequent).

Please replace it when ineffective.

Cleaning method 

Deodorizing filter

When there is dust around the deodorizing

filter, remove the dust with a vacuum 

cleaner, etc.

Do not wash the filter with water.

Clean the black side (front side) with 

a vacuum cleaner, etc.

HEPA composite filter

< about once every 2 weeks >

Dusting brush nozzle 

or gap suction nozzle

Lay with newspapers, etc 

to avoid dust messing floor. 

Do not wash the 

filter with water.

Please do not punch too much, otherwise

the filter may be damaged. 

Maintenance is unnecessary for the white 

side (back side).

Wipe off any dust and dirt using 

a well wrung-out cloth

Body and front panel

< about once a month >

Do not wipe it with a hard cloth or hardly.

Otherwise, the surface may be damaged.

Wipe the power plug with a dry cloth.

MAINTENANCE

9

Summary of Contents for F-PXV35M













Reviews: