OP
ERATION
OPERATION
Turn on or off the product.
Power Off/On
Air volume button
Sleep button Turbo timer button
Power Off/On button
3. Press the button again, the product stops operating.
Press the button to operate. (Air volume indicator lights on)
1. When using for the first time, operation will begin with the air volume under “Auto”.
2. Other than the above situations, operation will begin with the air volume from the last time it
was stopped.
To operate product within 2 minutes after the power plug is inserted, the indicator of air volume
under “Auto” will blink about 2 minutes, what it indicates the odor sensor is in the standby mode.
SETUP
Install filters
Power-on
Be sure to install front panel before use.
Install the filters (2 types) and front
panel.
Connect the
power plug.
Install deodorizing filter.
(There is no distinction between
inside and outside, upper and lower)
Install HEPA composite filter.
(There is distinction between inside and outside,
no distinction between upper and lower)
Install front panel.
When inserting the power plug,
as the odor sensor uses the degree
of cleanliness at this time as the
standard, we recommend that you
plug it in when the air is fresh
(such as when there is no cigarette
smoke).(The standard of the odor
sensor automatically updates itself
according to the degree of the
indoor cleanliness.)
Press button, then the
clean sign blinks for about 5
seconds.
Notice
Projections of the product (2 places)
With the black side (front side) outside,
and align it with the projections of the
product.
Fit the clutch into the
indentation (3 places)
of the product.
Push in the protrusion into
holes (2 places) of product
and press properly.
7
CONFIRMATION
AND SET
UP