FURTHER INFORMATION
About HEPA composite filter
Super Allergy-buster: inhibits the activity of allergic substances (pollen, dead mites and feces).
The HEPA composite filter which with the Bio-sterilization and Super Allergy-buster can inhibit
allergens (pollen, dead mites and feces), bacteria, mold.
The HEPA composite filter might emit unique and harmless smell of “Green Tea Catechin”,
”Bio-sterilization” and “Super Allergy-buster”.
Testing authority: Osaka Municipal Technical Research Institute
Test method: check the decrease of refined house dust mite allergen, by using enzyme immune
measuring method.
Inhibiting method: contact with Super Allergy-buster
Target: allergens trapped by the filter (mites, pollen)
Test result: inhibited 99% and above. (Daikou research report No. 2127)
When idle for a long time
Disconnect power after turning off the product. (The product still consumes power even at rest.)
Maintain the product as usual.
Put the product into poly bag and carton, and keep it in a dry place. (If you overturn it or keep it
flat, product malfunctions may occur.)
Conditions for
nanoe
TM
X
generation
nanoe
TM
X is generated by using the air in the room. Therefore, due to the differences in
temperature and humidity nanoe
TM
X may not be generated stably.
When nanoe
TM
X is generated, small amount of ozone will be released. However, the quantity will
be far less than the level in natural environment such as forest, and not be harmful to human beings.
About nanoe
TM
X
During operation, press and buttons at the same time for about 3 seconds
(nanoe
TM
X
indicator lights off)
.
Press the buttons for about 3 seconds again to restart the nanoe
TM
X
.
(nanoe
TM
X cannot be set during product stops operating.)
nanoe
TM
X
can be switched off.
Room temperature: about 5
℃
～
35
℃
(dew-point temperature: 2
℃
or above)
Relative humidity: about 30%
～
85%
MAINTENANCE
10
The sensor can detect the pollution of the air, and show the pollution level by indicator. The
product can optimize the air volume automatically in auto operation according to the air quality.
About odor sensor
Sensing scope
Odor sensor
Odor from cigarettes, incense, cooking, pets
Cosmetics, alcohol, sprays, etc.
Humidity (water vapor), oil
The wind generated when a door
is opened or closed, or sudden
temperature changes
May detect
Sensor
Stop operating the product, then press and buttons at the same time for
about 3 seconds. The air volume indicator will light on sequentially.
The sensitivity of the sensor can be adjusted. (The default setting is “medium sensitivity” .)
Please release the buttons, when the sensitivity is set as required.
Medium sensitivity
High sensitivity
Low sensitivity
The sensor’s operation may vary depending on the indoor airflow condition if a heater is placed
near the product in a room.
The sensor is not designed to detect bacteria and viruses.