因传感器灵敏度差异影响可能出现此现象。
气味污染度显示为什么一直不发生?
Such problems may occur because
of the difference in sensitivity of
PM2.5 sensor.
咨询或送去维修之前,请先确认以下情况。
出风口为什么发出“叽”的声音?
因
PM2.5
感应器灵敏度差异影响可能
出现此现象。
常见问题解答
FAQ
Please confirm the following before you put questions forward or send the product for repair.
There is a slight sound when nanoe
TM
X
is being generated. Depends on the
environment and operation mode, the
sound may be a bit loud or inaudible
but it is not abnormal.
Why is a “jee” sound from
the emission outlet?
Why has the gas pollution
level display never changed?
Why does the PM2.5 figure
remain unchanged?
Such problems may occur because
of the difference in sensitivity of
PM2.5 sensor.
为什么出风口会有异味吹出?
过滤网的吸附能力达到饱和后,气味也会
因吸附过盈而随风再次被吹出。
过滤网有污渍后未清洁。
The adsorption capacity of filter
reaches saturation, odor will also be
blown out again with the wind
because of excess adsorption.
The filter has not been cleaned after
getting dirty.
Why will air outlet blow out
the odor?
18
PM2.5
数值为什么不发生变化?
当
nanoe
TM
X
工作时,将发出些许该声音。
根据使用环境、运转模式不同,声音会大
小有所不同,这并非异常现象。