清洁方法
15
维护保养
MAINTENANCE
Cleaning method
用吸尘器等去除黑色面(正面)的灰尘
请勿用力按压，否则过滤网
可能会受损。
白色面(背面)无需
进行维护保养。
請勿水洗。
毛刷吸嘴或缝隙吸嘴
HEPA
多功能过滤网 <约
2
周
1
次>
垫上报纸等物品，
以免灰尘弄脏地面。
Clean the black side (front side) with
a vacuum cleaner, etc.
HEPA composite filter
< about once every 2 weeks >
Dusting brush nozzle
or gap suction nozzle
Lay with
newspapers,
etc. to avoid
dust messing
floor.
Do not wash the
filter with water.
Please do not apply too much pressure,
otherwise the filter may be damaged.
Maintenance is
unnecessary
for the white
side (back side).
使用充分拧干的软布擦拭污渍
请勿使用粗布擦拭或过度用力擦拭，否则会损伤
表面。
请使用干布擦拭电源插头。
进风盖及机体 <约每月1次>
Wipe off any dust and dirt using
a well wrung-out cloth
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
Wipe the power plug with a dry cloth.
Inlet cover and body
< about once a month >
使用如图所示的干棉棒进行擦拭。
用干棉棒去除镜片上的污渍
PM2.5
感应器 <约
3
个月
1
次>
干棉棒
请务必在拔出电源插头的状态下进行操作。
看不清楚时可用灯光照射。
请勿将干棉棒插入到镜片以外的其他部位。
定期擦拭镜片。(带有湿气以及被香烟的烟油污
染后，有可能无法进行正常感应。)
Dry cotton swab
Wipe the dirt off the lens with a dry
cotton swab
PM2.5 sensor
< about once every 3 months >
Wipe the lens with a dry cotton swab as
shown below.
Wipe the lens periodically.
(The sensor may not function normally
with accumulation of moisture and
smoke from cigarette.)
Do not insert a cotton swab in other parts.
You can use a light in order to see lens
clearly.
Be sure to disconnect the power before
cleaning.
維
護
保
養
MAINTENANCE
