EX-10
Ultra-slim Photoelectric Sensor
Amplifier built-in
extraordinarily small
and slim size
226
SERIES
Smallest body, just 3.5 mm
0.138 in
thick
High-speed response time: 0.5 ms
Flexible mounting
It can be mounted in a very small space
as its size is just W10
H14.5
D3.5 mm
W0.394
H0.571
D0.138 in
(thru-
beam, front sensing type).
The sensor is suitable for detecting
small and high-speed traveling objects.
The diffuse reflective type sensor is
front sensing and is so thin that it gives
an impression of being just pasted on
the mounting base. The thru-beam
type is available as front sensing type,
as well as, side sensing type, allowing
flexible mounting.
Diffuse reflective
•
Front sensing type
Thru-beam
•
Front sensing type
•
Side sensing type
Operation mode switch
Thru-beam type sensor incorporated
with an operation mode switch on the
bifurcation is also available. It helps
you to test the operability before start-
up.
Bright 2-color indicator
Waterproof
A convenient 2-color indicator has
been incorporated in the miniature
body.
Ten times durable
Flexible cable on
EX-10-R
is 10 times
as durable as conventional model. It is
most suitable for moving parts, such as
robot arm, etc.
The sensor can be hosed down
because of its IP67 construction and
the non-corrosive stainless steel
mounting bracket.
Note: However, take care that if it is exposed to
water splashes during operation, it may
detect a water drop itself.
Red beam makes beam alignment easy
The red LED beam projected from the
emitter helps you to align the sensor
heads.
2-color indicator
Red: Operation indicator
(
Green: Stability indicator
)
SENS.
SENS.
EX
EX
-17
-17
SENS.
SENS.
EX
EX
-17
-17
Operation mode switch
Operation indicator
(Orange)
Even for the thru-beam
type sensor, only three
wires have to be con-
nected.
Amplifier Built-in
Conforming to EMC Directive
(Excluding
EX-15
/17
)
UL Recognition
(Excluding 5 m cable length type)
