Panasonic ew1211a, Operating Instructions Manual

Page: 8 / 44

8
English
Partsidentification

 













 





Front Back
A
Mainunit
1
Nozzle release button
2
Power switch [0/1]
3
Mode switch
4
Mode indicator
5
Charging indicator
6
Ventilation hole
7
Suction hose
8
Filter
9
Water tank

Water tank cap
B
Charger(RE8-53)
(Theshapeofthepowerplug
differsdependingonthearea.)

Charging section

Cord

Power plug
>
Nozzle stands
?
Screw holes for wall mounting
The charger can be
mounted on a wall using
two wood screws.
C
Nozzle(x2)
@
Nozzle
A
Identification ring
B
Nozzle handle
Accessories
D
2screws
Note
There may be moisture inside the main unit (water tank and
suction hose). This is moisture left from the distilled water used
for product testing and is hygienically safe.
Charging
► Onthebathroomcountertoporashelf
1. Place the cord in the right, left or center
cord guide, depending on where the charger
will be placed.
2. Place the charger on a secure, level surface.
3. Plug in the power plug.
1
1
Insertmainunitsoitstands
uprightinthechargingsection.
The charging indicator will light up.
•
Be sure to place the main unit upright. If
the main unit is tilted or not in direct contact
with the charger, the main unit may not
charge properly.
•
Charging is completed in about 15 hours.
•
The lamp does not go off even when
charging ends.
•
The main unit will provide an operation time
of approximately 15 minutes of use when
the battery is fully charged. (The operating
duration will become shorter as the
batteries get older.)
2
2
Disconnectthepowerplugafterchargingis
completed.
•
The battery performance will not be affected even if it is
charged for more than 15 hours.