61
Installation Manual
Step 4. Turn on the Main switch (located on the left side of the inverter).
Step 5. If the inverter has multiple sources of power, the inverter will start
automatically. If the battery is the only power source, then press the enter
key for 7 seconds until two beeps are heard to start the inverter.
Step 6. Check Load AC output voltage: L-L 240 VAC / L-N 120 VAC.
Step 7. Turn on Load Breaker in the distribution box.
Operation and Display Panel
To Start Up Equipment (Overview):
How to Turn the System On - Grid-tied
Step 1. Check that the cables are properly connected,
Step 2. Turn ON External Solar by disabling Solar PV Rapid Shutdown (if
installed).
Step 3. Turn ON: (a) AC Grid Breaker, (b) Battery Breaker, (c) (DC Coupled
only) PV Solar Switch.
Note:
AC grid switch needs to be switched swiftly. If it does not catch, try
again with greater speed.
