background image

TQZJ535-2

Model No. 

ET-PKD120H

Installation Instructions

Ceiling Mount Bracket (for High Ceilings)

Thank you for purchasing this Panasonic product.

 

■ To customers

The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified personnel to perform 

the installation. 

After installation, have the installation personnel return these “Installation Instructions” to you, and save it for future use. 

When moving or removing the projector, give this manual to the certified personnel and have them perform the procedure.

 

■ To installation personnel

Read the “Installation Instructions” thoroughly and then perform the operation correctly and safely. 

Be sure to read through the section entitled “Read this first!” (page 3) before proceeding with the installation.

After installation, return these “Installation Instructions” to the customer.

*  The figure above shows a combination of this product and the separately sold ET-PKD120B projector mount bracket.

*  Unless specified otherwise, the ET-PKD120B is used in the illustrations of the projector mount bracket in these instructions.

Summary of Contents for ET-PKD120H

















Reviews: