9
English
2
2. Clean the epilation head [
B
,
F
] and the shaver head [
H
]
with the cleaning brush [
K
].
Wet cleaning
1. Lift the frame, fast/gentle/beginner caps upward while
holding the frame release rib [
B
3
]/the cap release rib
[
CDE
7
] or remove the frame by pushing the frame
release button [
H
].
2-4
2. Apply liquid hand soap to
the discs and the blades.
3. Turn the switch on and
then wet the discs and
the blades to create
foam.
4. Wash the head with water
to wash out hair.
Do not use hot water.
If soap is not completely washed away, then a white
deposit can accumulate and prevent the discs and the
blades from moving smoothly.
5. Turn the switch off, wipe the appliance with a dry cloth
and dry it well.
Replacing the outer foil
We recommend replacing the outer foil [
H
] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [
H
] only when replacing it.
•
•
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (
b
) on the blade
from the hooks (
a
) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
Removing the built‑in rechargeable battery
Remove the built-in battery when disposing of the epilator.
Perform steps
1
to
7
to disassemble the epilator using a
screwdriver.
Unplug the charger from the epilator before disassembling it.
Press the OFF/ON switch to turn on the power and then keep
the power on until the battery is completely discharged.
•
•
Summary of Contents for ES-WD70
Page 3: ... ...
