42
English
Mode
Time required (guide)
Charge
Charge
0 to 60 min
Clean/
Dry/
Charge
Clean
10 min
Dry
80 min
(170 min*)
Charge
0 to 60 min
•
It is not possible to change the mode after
the “Clean/Dry/Charge” mode has started.
Dry/
Charge
Dry
180 min
Charge
0 to 60 min
•
It is possible to change to the “Clean/
Dry/Charge” mode even after the “Dry/
Charge” mode has started.
* When the ambient temperature of the self‑cleaning
recharger is low (approx. 15 °C or lower), the time it
takes to dry the shaver increases.
•
Use the self‑cleaning recharger in temperatures
between 15 °C and 35 °C.
•
The Clean or Dry function may stop under extreme
low temperatures (approx. 0 °C or lower). In such a
case, the CHECK lamp will glow for approximately
5 seconds and the mode will switch to the “Charge”
mode without allowing you to select the “Clean/Dry/
Charge” mode or the “Dry/Charge” mode.
Cleaning the shaver without the self‑cleaning recharger
We recommend that you clean your shaver with the self‑
cleaning recharger or the sonic vibration cleaning mode
when the faucet symbol appears on the lamp display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring to unlock
the power switch.
4. Press the power switch for more
than 2 seconds to activate the
sonic vibration cleaning mode.
•
The battery capacity lamps
blink in order.
•
After about 20 seconds, it will
be automatically turned off, or
you can turn it off by pressing
the power switch.
5. Remove the outer foil section and
press the power switch for more
than 2 seconds to activate the
sonic vibration cleaning mode
and clean it with running water.
6. Wipe off any drops of water with
a dry cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to
the shaver.
9. Lubricate the shaver.
4
5
7
ES-LV94_CH.indb 42
2013/07/22 9:39:30
